Re: 1955 Caribbean - Removing door

Posted by acolds On 2024/5/14 6:58:08
My personal input on this matter was influenced by problem I found on driver's side door on Randy's door
While trying to adjust door would get it correct then it would move. The problem was two of the door lower hinge bolts were very loose threads
My cure was to get longer bolts and install nuts and lock washer on backside which is relatively easy \except for sharp edges on door hole punch
outs . My fix cured my adjustment problem just my experience. I did make another change addition added plastic to door metal with duct tape to keep water from getting to card and leather interior trim. Overkill as my old cars do not spend much time in rain..Water staining more problem with cloth trim

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=271551