Re: I need help identifying a plate either on the engine or trans.

Posted by TxGoat On 2024/6/3 8:08:35

Cartridge-type oil filters can have leak problems. Leaks can occur at the base of the canister and at the point where the bolt goes into it. New gaskets and fiber washers are a must, and the area on the engine where the canister mounts must be clean and free of old gasket material, paint, dirt, etc. Sometimes parts have been damaged due to over tightening. On some types, the base gasket fits into a groove in the block and the base of the canister can be out of line with the groove, which prevents a good seal, and may cause damage to the canister if it is tightened while out of alignment. Oil leaks almost anywhere on the engine can allow oil to find its way to the flywheel housing area due to gravity and air flow around the engine when the car is running.