352 onto an engine stand
Posted by Kiwi Lad On 2024/6/14 16:23:03
Hello from NZ !
Have pulled the 352 from my 400 for a freshen up after finding two split/chipped exhaust valves and general low compression.
I am hesitant to mount it on my engine stand using the 4 x transmission bolt holes in rear of the engine as the material seems thin, anyone able to set my mind at ease or show me a photo of how you have done this? I would hate to have a disaster …thanks in advance
Attach file:
IMG_6516.jpeg (2,539.02 KB)
Have pulled the 352 from my 400 for a freshen up after finding two split/chipped exhaust valves and general low compression.
I am hesitant to mount it on my engine stand using the 4 x transmission bolt holes in rear of the engine as the material seems thin, anyone able to set my mind at ease or show me a photo of how you have done this? I would hate to have a disaster …thanks in advance
Attach file:
IMG_6516.jpeg (2,539.02 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=272881