Re: Front End Rebuild Experience

Posted by HH56 On 2009/5/11 10:37:33

Don't have any idea what current charges are but maybe Randy or greendragon does or you could ask for recommendations when you buy bushings. Most older parts stores used to have a press in their backroom but don't know if they still do. Doubt it would be too bad--such a simple operation.

Having said that, don't think it is something you can do yourself without a press--without risking some damage. The bushings are in very snug and the geometry and dimension of support arm must be maintained. There is a dimension in the service manual, suspension section fig 17 for arm spread.

Suggest you keep that handy for reference & maybe even make a wood spacer to fit along the lines of tool shown before you take it to be pressed so no one gets careless and messes it up. Unless your car is very well secured while the suspension arm off, also suggest playing it safe and using the chain per Craigs post so no one can come along and bump or move things.