Re: Electronic ignition

Posted by PackardV8 On 2009/5/14 17:55:10

I made a tool from a standoff like HH56 indicates above.
In the absense of a tool i have useda pair of very small jewler type needle nose pliers or regular mechanics needle nose pliers with exra long jaws.

Most likely u should be able to cure the problem by applying silicone GREASE (NOT the spary) to the rhestat and twist the knob back-and-forth to scrub it in. I'll have to dig out a spare sw i have to look closer but i think there is another contact area that needs to be adressed too.