Re: 1956 Power Booster Installation
Posted by PackardV8 On 2009/6/4 12:23:40
not sure, but it looks like the pedal mounts are much closer together than oem location. Probably won't have any trouble then with the cross shaft of the pedal bending.
The firewall is very weak. Probably need to add the supports as seen in my set up above. The RITE support holding the PB relay is just a dummy and i won't bore anyone with why it is there.
The left support bracket DOES stiffen up the conversion assymbly. It bolts to the firewall hinge bracket and to the hole in the following pic.
Attach file:
(44.15 KB)
The firewall is very weak. Probably need to add the supports as seen in my set up above. The RITE support holding the PB relay is just a dummy and i won't bore anyone with why it is there.
The left support bracket DOES stiffen up the conversion assymbly. It bolts to the firewall hinge bracket and to the hole in the following pic.
Attach file:
(44.15 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=29919