Re: 1956 Power Booster Installation
Posted by PackardV8 On 2009/6/4 13:37:06
Radio:
I had problems with the oem Packard pedal. To get enuf leverage the power unit stem had to connect to the pedal very near the pivot shaft of the pedal. But that caused a terrific amount of ARC sweep on the power unit stem.
The oem Pedal is just too short unless u're using a master cylinder with a larger than 1" bore.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=29928