Re: Part Number and or Source?

Posted by Owen_Dyneto On 2009/11/12 18:17:22

I took one of the bumpers #444051 off my 56 Carib and started shopping for suitable material in MSC & McMaster-Carr. There are a dozen if not several dozens of black rubber materials of various durometers and types and compositions available in sheet and strip form. Length is of course no problem if you cut to length from sheet, and likewise the width which measures at about 5/8 inches. But the thickness appears to be a bit of a problem as I measure the original at about 0.385" or +/- 11/32; 3/8 is a standard thickness for stock materials but would be a bit too thin and after that its 1/2 inch material.