Re: DO NOT TRUST BTV
Posted by BigKev On 2009/11/14 22:44:23
The master cylinder bolts to the frame rail. I believe the ultramatic linkage mounting point is on the bolt nearest to the firewall.
This is what the master cylinder looks like. You can see how it bolts through the side of the cylinder. The side you are looking at would be against the framerail. Looks exactly the same on the other side. The pressure switch, distribution block screws into the far end not visible.
Attach file:
(26.22 KB)
This is what the master cylinder looks like. You can see how it bolts through the side of the cylinder. The side you are looking at would be against the framerail. Looks exactly the same on the other side. The pressure switch, distribution block screws into the far end not visible.
Attach file:
(26.22 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=40838