Re: 55 Electrics

Posted by Mr.Pushbutton  On 2008/3/2 20:43:03

The torsion level box has two relays inside that when pulled in via the time delay circut send a GROUND out to the solenoids in order to pull them in and feed juice to the leveling motor until its time not to. The relays are constructed in such a way that they are intergal to the construction of the chassis of the box--it is not possible to reverse their function as they are physically constructed to only go to ground. It's not that big of a deal, you just gut the two OE relays out, get another set of small 12V relays that can handle the current draw and wire them to send out a 12V hot signal to the solenoids