Re: 56 Executive Turn Signal Bulb Replacement
Posted by Randy Berger On 2010/9/13 23:02:37
Here's the latest score folks;
Howard 1, Dummy 0
Howard is right about the screws holdings the lenses. You might try some PB Blaster just to allow some lubricant to work its way into the threads.
Howard 1, Dummy 0
Howard is right about the screws holdings the lenses. You might try some PB Blaster just to allow some lubricant to work its way into the threads.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=59967