Re: Good source for distributor parts?

Posted by Jim On 2008/4/2 9:49:13

There are people that specialize in ignition components. You might look in Hemmings motor news. Maybe look online. I have a guy here locally that rebuilds distributors, and has parts. There are specific RPM's at which there should be specific amounts of advance occurring. The only way to ensure this is happening properly is to put the distributor in a distributor machine and check the advance curve. The correct weight springs are installed to allow the proper advance curve.

I provide the advance specifications from the manual to the distributor guy, he re-bushed the body, installed a rebuilt vacuum advance, installed a good used ignition plate, and put the springs in and curved it. In most cases distributors are neglected and never get this kind of attention. This complete refurbish made a huge difference in the way my car ran and performed.

Best of luck,
Jim