Re: Torsion level question

Posted by Owen_Dyneto On 2010/11/22 10:34:23

No matter which manual switch I use, the rear end either raises or lowers and the front end doesn't move.

Maybe I'm missing something here, but if the rear end goes up and down, that's how the system works. The movement of the front end, up and down, only happens in sympathy with the rear end going down and up, kind of like a pivot around the center of weight. Perhaps part of your problem is excessive friction in the front end pivot for the torsion bars - there are a couple of grease fittings there for some needle bearings - perhaps they've been long ignored. To work properly the system has to be essentially friction-free.