Re: linkage pictures.

Posted by HH56 On 2011/2/14 13:57:22
Craig, thanks again.

My concern is putting everything under the floor causes the booster to move forward. Even though centered now, diameter is slightly larger and just want to be sure nothing pops out. Am trying to keep it no longer than the BTV boost section so all should be OK in that respect, but it's close. Would also like to move it over toward engine slightly to make the lever work with the narrow 55 pedal better but you know those best laid plans----- .

The dual system will have to tilt to clear steering box and that is a bigger concern. Not having anything to look at, just don't remember if anything goes that far down to interfere. Would hate to have that option be a push button only. Standard shift is also a big question but don't expect any of those will pop up.

Just wanted to get a few pictures to get a feel of what is there and where.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=70782