Re: Back to lock removal

Posted by PackardV8 On 2011/3/20 7:36:34

WARNING: The ignition switch bezel on the 55 and 56 Packards is extrmely flimsy and delicate!!! It will break very easily.

To remove the ignition switch:

Hold the bezel FIRMLY against the dash with one hand. Do not allow it to turn or push out away from the dash.

With the other hand, reach under the dash and push the ignition sw. toward the rear of the car about 1/4 inch and then twist it about 1/8 turn to release it from the bezel.

Again; the ears on the chrome besel are extremely weak, fragile and flimsy. U have been WARNED!!!!