Re: Plate for 56 pat gas tank.

Posted by Bowman Davis On 2008/5/28 21:26:18
I haven't had a chance to go through my receipts for the wheel (brake) cylinders but I will (hopefully) be able to shortly. I may have got them from Kanter and not NAPA but I'll verify. The mechanic that was working on the car when I purchased it from the previous owner had bought new brake cylinders from Auto zone or advance auto and they were the right size 1 1/8th for the front and 1" for the rear. They looked identical to the packard cylinders (at first look) but when we tried to install then they would not bolt up correctly. After closer inspection there was a sort of slight bulge on the back casting that is not on the packard cylinders.

The problem with the tredle vac is an extremely hard pedal. I believe it is vacuum related and intend to make that my next task. The brakes work and stop the car (I haven't left the driveway)but without the booster working it is not very safe. If the vacuum checks out okay, I suppose the next thing would be the compensator port.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=7694