Re: All wiring nominal and TL not working

Posted by HH56 On 2011/5/21 14:59:11

Don't torch anything! Take the load off them by carefully following step --6- 5 in 55T-12packardinfo.com/xoops/html/downloads/STB/55T-12.pdf Just be careful when loosening the final 2 or 3 bolts that you know where your hands and everything else is. The lever will come around but if you watch the tension on bolts, should be controllable. After the load is off you can remove the assy the regular way and find out what is going on.


EDIT NOTE: Not knowing how car is suspended, if the rear end is hanging you may have to put a jack under it & raise up so the bars will be in a more normal state to completely unload them.

EDIT EDIT: STEP 5 not 6