Re: All wiring nominal and TL not working

Posted by HH56 On 2011/5/21 16:24:26

Ross, I agree but sure don't want to see anything torched. Those could also part with great authority when cut if not done carefully. That procedure can be done but absolutely does require extensions and finesse when the last bolts are near. Any one uncomfortable doing it, the screwdriver is a for sure option. With something like 30,000:1 ratio, will require a lot of turning to get them back at least a quarter to third before the load is off. I believe he is using decent wire but a good point on the jumper cable. Just don't want to take a chance if close to center or hit center already to have another few parts to add to the pile of sheared off arm and bent lever & bar assys out there..