Re: Question about tappets....

Posted by Tim Cole On 2012/2/1 17:51:58

Dear Pat:

I assume from your note that the problem has improved and that is good. If the lifters were starving for oil then it is possible that the clackers got damaged. I believe you can get a Dodge V-8 lifter via the auto parts store that will work.

However, the motor could also have dirt and sludge it in, so pulling the oil pan when you do the lifters is a must.

Finally, worn valve guides can also make noise so you should remove the valve covers, unload the lifters and check for valves that move alot when you push on them.

Hope this helps