Re: Parts in bottom of trans pan

Posted by Cli55er On 2012/3/20 9:14:39

also if that is the part that fell out, make sure you follow the correct proceedure for reinstalling it with that metal end plate. that small circular piece of metal spacer can get jambed between the metal end plate throwing things off. it has to fit perfect inside that hole when you put that end plate back on. although i didn't do the proceedure in the video. you have to use a gap gauge to hold the circular piece in the hole while you put the end plate on and then when the end plate is barely just tight you slide the gauge out and tighten the plate the rest of the way.

also if that spring and valve fell out, i would suspect the end plate and little screws are floating around somewhere too.

edit: there are other valves with nipples on them as well. the youtube videos i made are in 1080HD, so you should find what you are looking for.

http://www.youtube.com/watch?v=CH99QObDEk0

http://www.youtube.com/watch?v=NXaDB_zWpBc

http://www.youtube.com/watch?v=ZtM_PnLgnP0

Hank