Re: Torsion Ride Troubleshooting

Posted by 55 NC Clipper On 2012/12/17 18:59:58

The side lugs I was referring to was was off of the square black box that the two buss bars from the 10/32 on the solenoids, those are hot. There is a yellow wire on one side and a red or pink on the other.

That was my basic understanding of the on/off switch (override switch that I called earlier). That is a green wire to the control box. I thought if it was off there should be no power to the square box on the y shaped buss bar to the solenoid 10/32 lugs.

Thank you for your patience. I just want this thing to work right.

Bill