Re: Torsion Ride Troubleshooting

Posted by HH56 On 2012/12/17 19:07:21

I am thinking what you are measuring is the voltage passing thru the solenoid coils. The solenoid coils get power internally from the side lug the inline fuse connects to. That voltage is what is switched to ground via the 10-32 screws and limit switch by the relays in the control box. You will measure that motor supply voltage thru the coil to ground.

I don't know if you have the complete system schematic but here it is just in case.

Attach file:

---

  (51.88 KB)