Re: T-L Front upper control arm bushings R&R
Posted by R H On 2013/2/22 19:44:17
Here is the start of my control arm (link) tool, took the shape off of craigs picture in packard panther.
I used a 12 ton press, its 3/4x1, not set up to harden it, might use u clamps to hold it to link. or 2 plates and 4 bolts.
that's my 400 its on
Attach file:
(5.84 KB)
I used a 12 ton press, its 3/4x1, not set up to harden it, might use u clamps to hold it to link. or 2 plates and 4 bolts.
that's my 400 its on
Attach file:
(5.84 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=118098