Re: 1955,56 Packard tool J-5981

Posted by HH56 On 2008/7/3 21:48:34

There is a generic tool KD-431 that I bought at an auto parts store a few years ago. It may still be available. Before I found the tool, built one by cutting a notch in a piece of 16ga sheet metal. The size is 1/2 wide by 5/8 deep. I just used a scrap of sheet metal about 2 inches wide by 5 or 6 long. It does need to be stiff & smooth.

Attach file:

---

  (12.93 KB)