Re: Torsion Leveling Problem on '56 Clipper

Posted by Ken Hill On 2013/4/24 23:36:02

I was able to squeeze under the car tonight and look at the short and long link bars and see where there are in relation to the pivot point. Bad news is they don't look like the attached diagram. It looks like the short extending knob of the pivot point has moved too far towards the front of the car; moreover, it looks like it has bent the short link/bar. I'll try and lift the back of the car on some jack stands and get a picture of it.

Attach file:

---

  (39.11 KB)