rear sway bar

Posted by R H On 2013/6/2 1:43:02

Here is how i am doing my rear sway bar, started with henrys bolt system, but need to weld,

So i made these, only thing is that spacer is 3/4 inch, hope i can get bushing on. packard spacer was under 5/8s.

if you see a third plate, i screwed up trying to mill off head of spacer.

then i put plate in lathe to true it up, the heads of bolts will need to be turned down,, and nut will see about nut, going to try to get cotter pin in.

the bolts are grade 8, using 7/16-20 ,,2 inches long, will need to be turned down.

Attach file:

---

  (108.10 KB)


  (93.73 KB)


  (102.77 KB)


  (111.68 KB)