Re: 55/56 body mounts/pads
Posted by Charles On 2013/6/4 19:45:44
Excellent drawings! I just finished trying to take mine apart to help Hank out. Here are my pics. I think your drawings are a lot more help!
The ones I took pictures of are the one in the trunk and the other is the driver's side front mid door where the bolt comes in from the bottom into the brace.
Hank, are you going to wire wheel or otherwise de-rust the bottom of the car before putting it on the frame? Now would be a great time to do it, or at least areas that will be covered with the frame, trans, etc. Put some POR-15 or whatever undercoating you want and you probably won't need to remove the body again.
Attach file:
(129.79 KB)
(49.52 KB)
(115.96 KB)
The ones I took pictures of are the one in the trunk and the other is the driver's side front mid door where the bolt comes in from the bottom into the brace.
Hank, are you going to wire wheel or otherwise de-rust the bottom of the car before putting it on the frame? Now would be a great time to do it, or at least areas that will be covered with the frame, trans, etc. Put some POR-15 or whatever undercoating you want and you probably won't need to remove the body again.
Attach file:
(129.79 KB)
(49.52 KB)
(115.96 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=124665