Re: Left Rear Sway Bar Support Bolt Broken Off (55 Packard 400)

Posted by PackardV8 On 2007/3/25 21:18:27

Why did it snap off???? Were u trying to remove the nut????

Cut the narrow broken ppart off flush with the shoulder. Center punch the shoulder and drill it and tap it for something like a 1/4, 5/16 or 3/8 (at the max) bolt. Drill it only deep enuf to tap it for 150% of the bolt diameter.


GET SOME 10W30 ON THOSE TERRIBLE looking rubber insulators. They are nearly too far gone as it is.