Re: leveling

Posted by Let the ride decide On 2014/1/27 13:09:23

The inner upper bushings can be replaced, but it's not fun to do. There should be a few threads on this site on how to do it. Just be careful working on the TL system.

The bushing is a Ford product. It think it is listed in the part x-ref on this site.

The other bushings and rubber parts have been reproduced, so they are available.

One last thing to check are the bolts that hold the upper A arms. I had one break on my 55 Patrician. You could not tell by looking at it, but you could pull it right out, since it sheared off at the frame.