Re: leveling

Posted by HH56 On 2014/1/27 23:58:28

....is that is the third position that is bad.

If the leveler is actuating -- but not at the same time the brake lights are on -- then it would appear the switch is OK. It is a single pole, double throw switch. Only one output is active at a time.

If there is any question you could test it with a voltmeter while it is still connected to the plug. Connect one lead of the meter to ground and use the other to touch the switch terminals thru the end of the plug. With the car sitting, power should be on the pink (or purple) wire and also the light green wire for the leveler. When brakes are applied, power is cut off the light green wire and will then be on the pink and the dark green wire.