Re: Pushbutton - cracked contact bridge

Posted by jfrom@kanter On 2014/6/16 11:55:09

I asked Dan Kanter on this and he recommended removing the cracked portion and thoroughly cleaned it and use a high grade epoxy and apply the epoxy to the cracked piece and bolt it back in before it sets. He also recommended to improve the sector with epoxy as well while you have it apart. I have included picture of that repair. The epoxy is the grayish color applied to the face and top edge.



Thanks
James

<a href="http://s671.photobucket.com/user/JamesRFrom/media/Packard%20400/NCM_0144.jpg.html" target="_blank"><img src="http://i671.photobucket.com/albums/vv72/JamesRFrom/Packard%20400/NCM_0144.jpg" border="0" alt=" photo NCM_0144.jpg"/></a>