Re: Ultramatic Torque Converter

Posted by Ross On 2015/5/6 5:28:40
You can check your convertor balance by merely revving the engine in neutral to about 2000 rpm to simulate a road speed of 40-50.

I would vote for a problem with the front joint. Sometimes you can find a new "sweet spot" on those ball and trunnion joints by loosening the bottom side bolts on all 3 motor mounts and shifting the whole engine/tranny to a different position.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=161379