Re: Power Steering Actuator Bracket

Posted by Packard 1948 On 2015/5/18 22:40:13

HH56,

You have been most helpful...can I PLEASE trouble you for the measurement for the distance between the two top bolt holes?

If...BIG IF...they are 2.00 inches on center then my guess is that the holes are aligned so that all I need to do is center punch and drill the third hole and then thread the third hole and then bolt it on then...my guess (hope)... is that the bracket will be a direct bolt on deal.

I could almost make a template off of your diagram and see if the cardboard template will work.

THANKS AGAIN!!!

Bill