Re: fuel pump

Posted by Steve On 2015/5/26 13:46:58

This is a follow-up report. To my 1951 Packard 200, 6V POS ground, I installed the AirTex electric fuel pump #E8011 purchased 2 from Amazon at $28.00 Each with free shipping (they arrived the next day.) Easy install, and as Howard stated, I did ground the pos red wire from the pump to the frame and powered the black wire. Wired in a switch with fuse link to the ign switch. and it works. I drove the car at freeway speeds for 5 miles with the electric pump off, the mechanical pump on the engine did not have a problem supplying gas at the freeway speed 65-70 mph. I returned the 5 miles to the shop with the electric pump engaged and let it idle for 20 mins, then turned the car off and left the key on with the pump still on with out flooding the carb and engine with too much fuel pump pressure. The pump can be heard running when you sit in the car and the car is not running but you don't hear anything in an idling car. I do plan to install the same set up on my 55 dodge and 53 Packard.....3 of my 4 cars do get heat stroke (vapor lock) especially after a freeway drive and trying to return to regular street driving or 85 to 90 degree ambient in stop and go traffic.
Thank you again Howard.