Re: Packard V8 in the Engine Masters Challenge

Posted by Craig Hendrickson On 2015/9/5 19:08:25
Interesting and well done. I looked at the Mopar intakes at one time before I scored the 2x4 Caribbean.

Back in the early 1970s My H-O Racing partner and I built a 2x4 "Tunnel Ram" intake for our Pontiac high-rpm race engine. It was modified essentially the same as you described, i.e., changed the head entry angle and interdistance, but we had to "slice & dice" it because the SBC intake we started with had #1 (D-side) cylinder forward-most in the block and Pontiac has the #2 (P-side) cylinder forward-most.

Doing it that way definitely works! Good luck!

Craig

Original Image

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=166399