Re: !956 Power window electric motor

Posted by Packard Don On 2016/3/9 23:35:27
Quote:
I don't know, but empirically I can tell you that running the full current through the switch is a bad design! I had to disassemble the 4-switch in my Pat and clean all the contacts because there is no relay in the loop and some of the contacts were burned.


That's very true but keep in mind that in this case the relays will not help to take away any load from the switches. The full load will still be going through the switches and the relay is used only to reverse the polarity at the motor.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=173563