Re: !956 Power window electric motor

Posted by HH56 On 2016/3/10 13:30:18

Battery power is already at each door so I am leaving all alone but with one addition. The switch leads will disconnect from motor and plug into the relays so no change there. A tap connector similar to this will go on the center power wire of switch to provide voltage to the relay contacts. The tap will be the type that the added wire plugs into the tap instead of being a solid connection. That way all will just unplug if stock wiring is wanted. The tap connector will stay on the wire but will be unused.

Attach file:

---

  (30.80 KB)