Re: Ultramatic fluid leak
Posted by Warren Jones On 2015/7/25 8:16:19
Thanks Tim. I wasn't aware of the torque difference for the aluminium case... Good advice. Thanks to all for the good advice... Very much appreciated.
By the way, when removing the pushbutton actuator from the side of the transmission, I didn't have a small scissor type jack as posts elsewhere on this forum have advised to use to push the trans across to enable removal, so I improvised and used a turnbuckle to pull it across instead. It worked really well and was quick and easy to install... May be of assistance to others as an alternative to the jack method.
Attach file:
(30.84 KB)
(28.60 KB)
By the way, when removing the pushbutton actuator from the side of the transmission, I didn't have a small scissor type jack as posts elsewhere on this forum have advised to use to push the trans across to enable removal, so I improvised and used a turnbuckle to pull it across instead. It worked really well and was quick and easy to install... May be of assistance to others as an alternative to the jack method.
Attach file:
(30.84 KB)
(28.60 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=164565