Re: Torsion Level Issues

Posted by jerbear On 2015/8/26 21:27:33

We're making progress. I was able to locate the spare three post switch I bought years ago. Installed it and connected the purple wire at 9 o'clock and the brake lights didn't illuminate. Good sign. Hooked light green and dark green as you suggested. Still no brake lights. Pushed the brake pedal and have brake lights. All good. Turned the T/L toggle switch on and nothing happened. Grounded the side terminal of the 'up' solenoid and heard the motor start (first time that's happened) but the back end didn't come up. Left the motor run and slowly the rear started to come up. Car now sits level--another first. Looks a lot better than the butt sitting on the ground. Major progress, now need to figure out how to make it level automatically.

And the small T/L diagram on page 63 (Figure 96) is incorrect.
Making the center post 12 o'clock:
* 9 o'clock is purple
* 12 o'clock is light green
* 3 o'clock is dark green.

Thanks for your help.