Re: Brake light switch- '55 Clipper

Posted by HH56 On 2015/8/26 20:28:11

Shouldn't be necessary to bleed as long as the switch is in the original spot and the fluid is below the switch so it can't run out. Which Clipper do you have? If a 55 Deluxe or Super with conventional springs it would have the two terminal and those should be available at any parts store. Three terminal was only on the TL cars.

Do you have power to the switch? In 55 the brake light fuse is the body feed fuse located in the block under the dash. Sometimes the holders get a bit oxidized and fuses don't make a good connection.