Re: 55 Clipper Door Removal

Posted by HH56 On 2008/10/30 20:27:04

Either way, you'll have to disconnect the door check but if at all possible do not touch the bolts inside the door. You have to file or cut the rivet on door check. Packard said to remove the Phillips screws and if others not touched, door would go back with no adjustment required. Only problem is those screws can be a b---h to remove. If it has gotten wet or sat untouched with condensation inside there, strongly suggest dosing with a good penetrating oil a day or so before you do it. Maybe a couple of whacks with an impact screwdriver to loosen, then a large screwdriver after the oil had a chance to work. I had a heck of a time on one door and finally resorted to the bolts. That one did require adjustment and is a PIA by yourself. I held mine up by making a padded "L" frame that would slip into & over my floor jack. Worked pretty well.