Re: Disassembly of convertible top

Posted by 55clipper On 2016/4/29 10:22:04
I have had the parts tig welded at several different places. One of the welds is still holding but the others have cracked again. fixing them with steel flats have held but it is not right. The cylinders must raise and lower in unison, if not they crack. I have replaced the pump three times. Ditto the pumps. No binds in the mechanism. replaced hoses. I have bled the system but don't see any reference to bleeding anywhere. I took it to a top shop and they succeeded in breaking another rail. I've spent a lot of time and money on this problem.

This Post was from: