Re: 1955 Hardtop stoplight problems
Posted by Owen_Dyneto On 2017/10/6 13:08:44
Can the stoplight switch be stripped and contacts cleaned?
No.
If the switch is replaced do the brakes need to be bled after, I.e does removal break into the hydraulic line?
Never had to bleed after replacing the hydraulic switch. If your switch is bad, I recommend you go with the PNR kit which uses the very common and inexpensive SL-134 switch. Pix below.
Attach file:
(74.78 KB)
No.
If the switch is replaced do the brakes need to be bled after, I.e does removal break into the hydraulic line?
Never had to bleed after replacing the hydraulic switch. If your switch is bad, I recommend you go with the PNR kit which uses the very common and inexpensive SL-134 switch. Pix below.
Attach file:
(74.78 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=196335