Re: Power Antenna Wiring

Posted by HH56 On 2008/12/20 10:41:22

It does not sound like that switch or wiring is stock Packard either. The wiring from factory should be as shown with a 20amp inline fuse in the red wire from ign switch to ant switch. That motor (as does almost all reversible motors that Packard used has 2 separate coils, one for each direction) The mounting screws to body provide one conductor and ONE of the wires depending on direction connects to a voltage and provides the other. There should be no place on switch for any additional wire to hook up, nor do the wiring diagram show any connection to fuse block.

Attach file:

---

  (9.97 KB)


  (11.48 KB)