Re: Intake Manifold Vac lines
Posted by Bob E. On 2018/1/5 23:05:08
My attempts at removing the steel line in one piece were not successful. It looks like the steel line from the choke slides inside a larger diameter line, the choke stove, that is inside the manifold itself. I've tried using a torch to heat them up, PB blaster, lots of pulling etc., but no luck as they are probably rusted together.
Any suggestions as to how to liberate the steel tube from the choke stove?
thank you.
Attach file:
(269.26 KB) (250.79 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=199054