stainless window trim

Posted by happy On 2018/3/25 10:59:19

I am currently in the process of installing new weather stripping on the front and back windows in 1955 400 and experiencing considerable difficulty in the application of the stainless steel trim. The service manual suggests that the rear window upper trim together with the weather stripping be install as an assembly into the. Window opening. I did this, but one of the compound curved end pieces came lose and I could not reinstall it with the rubber in position. So I took the window out and tried it again with similar results. Next I tried cementing on the trim with mixed results. I would be most interested in hearing any suggestions or comments from people that have experiences with this. As always, past comments and suggestions have helped a lot and are always deeply appreciated.

happy