Re: stainless window trim

Posted by Marty or Marston On 2018/3/25 22:15:20

I have found that in some situations where it is hard to get the standard glues (for cementing) to work that a tube of black urethane sealant will work wonders. The stuff is available from the big box stores (e.g. Lowe's. Home Depot, etc.) in the weather caulking sections. Make sure it is a urethane material. Use it as a glue and use tape to hold everything in place while it cured. Wait a week or so for curing and hardening. I'm almost certain that the glued portion will not fail and your weather strip will be in place

I had problems with the black windshield weather stripping on my '32 901 and trying to install it in the window frame. I cut off a portion of the "T" section from the weather strip and used he urethane sealant to glue it to the strip. I held it in place for a week with Blue painters tape as the urethane cured.