Re: '55 Torsion Level System Trouble Shooting

Posted by Marty or Marston On 2018/12/25 17:23:41

I was finally able to get back to this issue. Today I checked the following:

1. Voltage on the Lt Green wire to the dash switch & got 12V
2. Found that the dash switch works fine
3. Verified that the fuse inside the car was good
4. Measured 12V on the solenoid underneath the car
5. Found brake lights work fine (Remember that I have 2 pole brake switch with a relay in the system
6. Found that I have 12V on the Lt Green wire on the TL Controller.
7. Found that the 12V in step 6 goes to 0 when the brakes are applied.


I briefly looked for the limit switches and did not find them. At this point I decided that it was time to call it a day