Re: '55 Torsion Level System Trouble Shooting

Posted by Marty or Marston On 2018/12/28 15:01:14

I was able to do some troubleshooting on the unit. I disconnected the linkage between TL Controller and the TL arm. With the dash switch on when the turnbuckle was pushed in one direction, the system worked while it did not in the other direction.

With the dash switch off, I preformed steps 7 & 8 on page 45 mentioned in the Electrical section on the Service manual. Grounding terminal "B" (Pink wire the motor runs) while grounding terminal "A" nothing happens. I tested the motor with 12 volts I've determined that the motor runs in both directions.