Re: '55 Torsion Level System Trouble Shooting

Posted by Marty or Marston On 2018/12/28 18:36:03

Howard,

Thanks for your expert help. I think you have helped solve the problem. Both solenoids checked out and the arm on the limit switch (LS) was not hung up. Therefore, I looked at the yellow wire connection from the LS. Since it was a crimped connection with a little corrosion, I decided to clean it up and solder it.

When I tested it with the dash switch off preforming steps 7 & 8 as previously mentioned the motor worked and the car leveled out.

Again Thanks to everyone for your help.